Địa chỉ: Tầng 2, Tòa VP Meco Complex, ngõ 102 Trường Chinh, Q.Đống Đa

Van Bi nhựa 3 Cổng Plast-O-Matic

Liên hệ

please_choice

Known as “The Engineered Ball Valve”, Series TMBV provides more safety and design features than any other thermoplastic ball valve. With its mirror-polished ball, perfectly machined sealing surfaces, Trunnion centering design, Teflon thrust bearing and O-ring loaded floating Teflon seats, the True Blue three-way ball valve offers smooth turning even in difficult applications. The floating seats automatically compensate for seat wear, and after long-term cycling, the carriers can easily be returned to their original position simply by tightening the union nuts.

The 2-hole ball design is standard; it is ideal for applications where flow cannot be mixed. To prevent a momentary no-flow (“dead-head”) condition, an optional 3-hole ball is available. Please specify when ordering.

The top to bottom “Trunnion” design permits flow and pressure in either direction, and eliminates the stresses inherent to a ball secured only at the top. An ultra smooth flow path virtually eliminates turbulence and pressure loss and permits flow rates that far exceed pipe manufacturer’s specifications.

Features:

  • Valve shaft (stem) reinforced with stainless steel rod to eliminate flexing and breakage.
  • Dual shaft seals eliminate leakage.
  • Teflon® bearing on shaft eliminates friction and wear; stem design is “blow-out” proof.
  • Teflon seats energized with O-rings eliminate wear and improve cycle life.
  • Trunnion design eliminates lateral ball stress and allows downstream piping to be disconnected under full line pressure.
  • Smooth flow path minimizes pressure loss.
  • Fully concentric and mirror polished ball assures smooth, leak-proof operation.
  • Three true-union ends for ease of piping installation and removal; helps lower costs and reduce footprint.
  • Choice of 2-hole or 3-hole ball.
  • Each valve is 100% individually inspected and tested prior to shipment.

Thông số kỹ thuật

Series TMBV is molded of Type 1 Grade 1 Geon® PVC and Corzan® CPVC. Standard O-ring seals are Viton® or EPDM. Seats and shaft bearings are Teflon. Stainless steel shaft support is not in contact with liquid. Standard connections are threaded (NPT or BSP) or socket (Schedule 80 or Metric). For optional materials and connections, please consult factory.

Đánh Giá

0

( 0 đánh giá)
()Rất hài lòng
()Hài lòng
()Bình thường
()Dưới trung bình
()Thất vọng
Thong ke